Specially Designed For Areas Where Optimum Surface Preparation Is Not. Please call us for advice. Jotamastic 80 Is A Two Component Epoxy Mastic Coating For Repair And Maintenance. Recommended topcoats (above the waterline): Technical Data Sheet Jotamastic 80 Surface preparation Substrate Carbon steel Shop primed steel Clean, dry and undamaged shop primer (ISO 12944-4 5.4) Coated surfaces Clean, dry and undamaged compatible coating Clean, dry and undamaged compatible coating Optimum performance, including adhesion, corrosion protection, heat resistance and chemical resistance is achieved with recommended surface. Note: Pack size is 4.6 litres or 18.3 litres including hardener.

Use the Wintergrade version for application below 10☌ and faster curing times in normal conditions. Aluminium flakes within the coatings create an impenetrable barrier to water and increased coating flexibility.įor best results apply two coats above the waterline and three coats below the waterline at a typical spreading rate of 8 m² per litre. The aluminium range is particularly suited for submerged areas (look in choose colour for Aluminium or Aluminium red-toned). product all surfaces shall be clean, dry and free from any contamination. Jotamastic 80 is built on the same technology platform as Jotamastic 87 and is recommended as an anti-corrosive coating for steel above and below water. Other variants available Jotamastic 80 MIO Refer to separate TDS for each. Jotamastic 80 is a two-pack epoxy mastic paint, which can be applied at low film thicknesses (from 75 to 200 microns in a single coat).

Buy Jotun Jotamastic 80 marine primer online UK, for sailing boats and yachts with free delivery to the UK.

Free download jotamastic 80